WATER TREATMENT SYSTEM
- Diffusion in a tank.
- Ventury injection with static mixer for enhanced absorption
- Continuous Ozone Absorption System for mineral water plants.
- Drinking Water On-Line Ozonation
CREATIVE OZONE INJECTION SYSTEM (Booster Injection)
This Ozone Mixing System is a state of art mixing technique for getting a dissolution efficiency of 85-95%. Normally for Ozone Injection, a Pressure Differential of 1.5 to 2.0 kg/cm2 is required between Inlet and outlet of Ventury Injector. To develop such Pressure Differential at the Pipeline the flow gets adversely affected due to throttling of Pipeline by Flow Control Valve. In the proposed system there is no change in the flow of the water in the pipeline due to the injection of Ozone.
The system will consist of a Booster Pump, Ventury Injector, and Static Mixer on a By-Pass Header.
Booster Pump is installed on the by-pass line and will take about 20% of the water from a tapping on main pipeline; a Ventury Injector will be installed at the outlet of the pump for injecting Ozone into the water.
For better mixing of Ozonized water in the main stream, a static mixer is installed after the Ventury Injector thus this concentrated Ozone mixed water is fed back in the main line making it totally disinfected, at the same time maintaining a constant pressure and flow in the line.
Industrial Ozone Generators
Features
- Proven and state-of-the-art design.
- Ozone output regulation from 20-100%
- Ozone cells with advance imported Dielectric
- High concentration and efficient Ozone generation
- Operation and Maintenance Friendly
- Digital Ozone output in gm./hr. and fault diagnostics
- With & without feed gas generation system
- Fully Automatic & Optional Remote Control